Inno Roof Rack Review - 2017 Nissan Altima- Video

Today in our 2017 Nissan Altima, we're going to be test fitting the Inno Roof Rack System, consisting of part numbers INB127, these are the Inno square crossbars, 50 inches long; part number INSU-K5, these are the Inno feet for the square crossbars for naked roofs; and part number INK625, this is the custom fit kit for this particular vehicle. The Inno Roof Rack is great for carrying a wide variety of accessories ranging from bike racks to cargo baskets to enclosed cargo boxes to ski carriers to some water sport carriers. The bars are nice and sturdy and have a carrying capacity of 220 pounds, although you always want to double check with your vehicle's manual to make sure your roof can stand that amount of weight. Now that we've gone over some of the features of the roof rack, let's go ahead and show you how it installs. We have a front one installed already and we had the rear one partially assembled. This is basically what we're going to get with your roof rack kit here. We'll have the foot, the pad, and the actual clamp itself that goes around, plus these two pieces which fit onto the foot as well. First off, we'll go ahead and place our foot on the end of our square bar here. You see that it has a square opening, however you have to push the bolt here down. more

Watch Video

12/28/2016 12:28:50 PM

Thule Roof Rack Review - 2016 Nissan Quest- Video

Today on our 2016 Nissan Quest, we're going to be test fitting the Thule Roof Rack System, consisting of part numbers THLB58, these are the Thule Square Load Bars, 58" long, and part number TH450, these are the Crossroad Roof-Mounted Foot Packs, specifically for your factory raised side rails. We already have the front one installed. It's a nice, sturdy bar, along with the rear load bar. It has a carry capacity of 165 pounds, although you want to double check with your vehicles manual to make sure it can withstand that weight on the roof, as well as the bars. We already have the front one installed, let's go ahead and show you how the rear one installs. It's very easy and very quick, and these can fit on multiple vehicles. We'll take our Crossroads foot pack, make sure it's in the open position, and this portion here will slide on to the end of our load bar. more

Watch Video

10/20/2016 12:16:10 PM

Inno Roof Rack Review - 2016 Nissan Quest- Video

Today in our 2016 Nissan Quest, we're going to be test-fitting the Inno Roof Rack System consisting of part numbers, INXB115-2, these are the Inno Area Crossbars, 45 inches long, and part number INXS-100, these are the Inno Flush Feet for Aero Crossbars, particularly for raised side rails like you see here. We already have the front one installed and you can see the shape of the bar has a nice aerodynamic shape to it and that's going to cut down wind noise and drag while you're driving. We have these end-caps here that are lockable so your roof rack will be secure to your side rails once it's installed. This, along with the rear cross bar, have a carrying capacity of 165 pounds. Although, you want to double-check with your manufacture's instructions to make sure your roof can withstand that kind of weight. We have the front one installed. Let's go ahead and show you how the rear one gets put together. We already have it partially assembled on our table here. more

Watch Video

10/14/2016 9:16:18 AM

Thule Roof Rack Review - 2016 Nissan Quest TH450R- Video

Today on our 2016 Nissan Quest we're going to be test fitting the Thule Roof Rack System. Consisting of part numbers THARB53 these are the AeroBlade Load Bars and these also come in black as part number THARB53B, and then part number TH450R and these are the Rapid Crossroad Foot Packs that mount around your factory raised side rails. Now, we already have the front one installed and as you can see, the bar itself has a nice aerodynamic shape to it and that's going to cut down wind noise and drag while you're driving. Along with the rear load bar installed, this does have a carrying capacity of 165 pounds although, you want to double check with your vehicles manual to make sure they can withstand that weight on the roof. Let's go and show you how the rear one goes into place. We already have it partially assembled on our table here. We'll take the one foot pack here, and you'll see it has this T shaped bracket here at the top. more

Watch Video

10/11/2016 10:06:39 AM

Inno Roof Rack Review - 2016 Nissan Versa- Video

Today on our 2016 Nissan Versa, we'll be doing a test fit on the Inno Aero Roof Rack System and using part numbers INXB93-100 for our crossbars, part number INXS200 for the flush feet, and part number INK608 for the custom fit kit. As you saw, we've already got the front one installed. Let's go ahead and do the rear one together. Let's start by grabbing our flush foot here. Then we're going to grab our pad. We need to make sure that this goes on the proper way. more

Watch Video

7/26/2016 10:26:37 AM

Rhino Rack Roof Rack Review - 2016 Nissan Versa- Video

Today on our 2016 Nissan Versa we'll be doing a test fit on the Rhino Rack Vortex Aero roof rack system using part numbers RRVA118B-2 for the aero crossbars and part number RRRLKVA for the leg kit and part number DK232 for the custom fit kit for our Versa. To begin our test fit you'll notice that we've already got the front one installed. We're going to do the rear one together. Let's go ahead and start by grabbing our leg, okay Then we'll grab our pad. Now on the bottom here you'll notice that it's got this raised portion here. We want to make sure that this facing inward as you see it here. more

Watch Video

7/26/2016 10:26:06 AM

Inno Roof Rack Review - 2016 Nissan Juke- Video

Today on our two thousand sixteen Nissan Juke, we're doing a test it of the inno aero crossbars. The part number for the crossbar we're using today are INXB93, which is the bar for our back and INXB100 for the front. Our foot pack today is INXS200 and the fit kit for this vehicle is INK399. Now we already have our front bar put together. We've got one of our foot packs for the back bar. I'm going to show you how to put the last one together and then how we load it up onto our vehicle. Everything that you see here is included, the only thing you want to provide is a flat tape measure, even though regular tape measure, just to measure everything. We're going to start off with our foot pack here. more

Watch Video

6/24/2016 3:51:06 PM

Rhino Rack Roof Rack Review - 2016 Nissan Altima- Video

Today, on our 2016 Nissan Altima, we're doing a test fit of the Rhino-Rack Vortex Aero Crossbars. The part number for the crossbars today is RRVA126B-2. For our foot pack, we're using RRRLKVA, and the fit kit number for our Altima is DK381. We already have our front crossbar installed and put together. We're going to show you how we put our last foot pack together onto our crossbar, and then how we load it up onto our vehicle since it is the same way. Starting off, everything that you see here including our other foot pack is included in our kit. We're going to start by taking our foot pack here, and we're just going to pop off the end. more

Watch Video

6/23/2016 12:36:06 PM

Inno Roof Rack Review - 2016 Nissan Altima- Video

Today on our 2016 Nissan Altima, we're doing a testfit of the Inno Crossbars. The part number for our crossbars today is INXB 108-2, for our footpack, we're using INXS 200 and for our fit kit for this vehicle we're using INK 625. Now we already have our front crossbar put together, we've got one of our footpacks for the back bar put together, we'll show you the last one, how you secure it onto our bar, and then how we load that up onto our vehicle. Everything that you see here on our table is included with our kit. We're going to start by taking our footpack here, we'll take our rubber piece and we're just going to fit it onto the bottom. Push it down, make sure it's completely secure on the bottom of our crossbar here. Then, we'll flip it around and we're going to unscrew this bolt. We can take our clamp, we're going to hold it into place here, and start to tighten down that bolt once again. Now we just want to tighten it down just enough so that the clamp is held into place. more

Watch Video

6/9/2016 11:06:24 AM

Inno Roof Rack Review - 2012 Nissan Murano- Video

Today on this 2012 Nissan Murano we're going to be test fitting the Inno Roof Rack, part numbers INXB108, which there is going to be two of those, that's going to be the cross bar. Then part number INXS100, that's going to be the Inno Flush Feet. We have the first one installed here. I'm just going to point out a couple of features about this. This has a nice aerodynamic shape which will cut down on wind noise and drag while your driving. It has this nice flush look on your roof rack, with these end caps here that do lock. more

Watch Video

4/19/2016 2:26:06 PM

Rhino Rack Roof Rack Review - 2016 Nissan Pathfinder- Video

Today on our 2016 Nissan Pathfinder we're doing a test fit of the Rhino rack vortex aero crossbars. The part number for the crossbars we're using today is RRVA126V-2 for our SX series legs we're using RRSX001. We already have that front crossbar in place. We're going to show you how we put the back bar together and then how we put in onto our vehicle. We're going to start by taking our foot pack here and we're just going to slide it in place on our crossbar. Then we can move this off to the side and we'll open up our vehicle doors. more

Watch Video

4/14/2016 11:39:26 AM

Rhino Rack Roof Rack Review - 2015 Nissan Pathfinder- Video

Today on our 2015 Nissan Pathfinder we're doing a test fit of the Rhino-Rack Vortex Aero Crossbars. The part number for the crossbars we're using today is RRVA126B-2. Then for our foot pack here we're using RRSX001. We already have our front crossbar all set up together and on our vehicle. I'm going to pull in our white table here, and we'll show you our back crossbar, how we put on the foot pack, and then how we load it up onto our vehicle. We're going to start by taking our foot pack here and just pulling it all the way back, flip it around, and we're going to fit it into our channel here at the bottom. It should be pretty easy to slide over. more

Watch Video

4/6/2016 12:36:59 PM

Rhino Rack Roof Cargo Carrier Review - 2016 Nissan Frontier- Video

Today, on our 2016 Nissan Frontier, we'll be doing a test fit of the Rhino-Rack Pioneer Platform. That's part number RR42114BF. Now, its dimensions are 38 inches wide by 48 inches long. It's going to allow you to mount a wide variety of Rhino-Rack accessories. You can see you got all these channels here that you can mount anything from bike racks to gas cans to spotlight mounts, really anything at all. We've already got 3 of the feet installed around our roof rack system. I'm going to go ahead and show you how to install the last one. more

Watch Video

3/15/2016 10:46:06 AM

Rhino Rack Roof Rack Review - 2016 Nissan Frontier- Video

Today on our 2016 Nissan Frontier, we will be doing a test with the Rhino-Rack Vortex Aero Crossbar Roof Rack System, using part numbers RRBA137B-2 for the 54-inch aluminum black crossbars, part number RRLKVA for the leg kit, and part number GK108 for the clamps and the pads. We have already got one installed on our Frontier, as you can see here. It is our front one. Let's go ahead and do the back one together. For the back one, I have already got the leg and clamp installed, so we are just going to finish off by doing the side here. The first thing we will do .. let's go ahead and grab the leg. more

Watch Video

2/29/2016 6:51:06 PM

Rhino Rack Roof Rack Review - 2012 Nissan Murano- Video

Today on this 2012 Nissan Murano, we're going to be test-fitting the Rhino-Rack Vortex Aero Roof Rack. The part numbers are going to RRVA118B, those are going to be your crossbars. Then we have the SX series legs, part number RRSX001. We have the front crossbar installed. Go over a couple features of this. It does have a nice aerodynamic shape so it's going to cut down wind noise and drag. But it also has this vortex strip here at the top which actually can be removed and then you can place things inside that T-track, accessories such as bike racks, cargo baskets, or anything else that has a T-track accessory. Let's go ahead and show how the rear one goes on. more

Watch Video

2/29/2016 9:27:12 AM

Rhino Rack Roof Rack Review - 2016 Nissan Versa Note- Video

Today on our 2016 Nissan Versa Note we're are doing a test fit of the Rhino Rack Vortex Aero crossbars. Now the part number for our cross bars here is RRVA1180B-2. For our foot pack we have RRRLKVA and for our fit kit for the Note we have DK 382. Now we already have that front crossbar in place we're going to show you how we put this last foot pack together here and how we put this crossbar on to our vehicle. I've gone ahead and positioned our clamp on here and tightened it down using our bolt, I'll just unscrew that tighten that down just a bit keep that clamp in place. We are going to start by removing our plastic foot here and we are going to take our pad and we're just going to insert that in, its going to face forward now that arrow there but once we get it on to our vehicle its actually going to face backwards Then we'll take our entire foot pack here and we're just going to use this piece and slide it into place. Now that loose on there you will need to provide a flat tape measure or any kind of tape measure that you may have. more

Watch Video

2/10/2016 11:28:42 AM

Rhino Rack Roof Rack Review - 2015 Nissan Rogue- Video

Today on our 2015 Nissan Rogue, we're doing a test fit of the Rhino Rack Vortex Aero crossbars. The part number for the crossbars we're using today is RRVA126S-2. For the foot pack, we have here is RRSX001. We already have our front bar on. We're going to show you how we put this last foot pack on to our crossbar and then how we load that up on to our vehicle. We're just going to flip the crossbar over. We're going to line everything up down here at the bottom track. more

Watch Video

1/13/2016 3:16:06 PM

Rhino Rack Roof Rack Review - 2014 Nissan Maxima- Video

Today on our 2014 Nissan Maxima, we're doing a test fit of the Rhino Rack Vortex Arrow Crossbars. Part number for our crossbars here is RRVA118B-2. For the footpack we're using, it's RRRLKVA and for the fit kit down here, part number is going to be DK171, and that fit kit is designed to work with these Maximas. We've already got our front crossbar on. I've got one of our footpack and fit kits installed on this one. We're going to show you how to do the other one and then put the back crossbar on. The first thing we want to do is take our footpack here and our rubber piece. more

Watch Video

12/3/2015 3:09:57 PM

Inno Roof Rack Review - 2014 Nissan Maxima- Video

Today on our 2014 Nissan Maxima, we're doing test-fit of the Inno Square Bars, the part number for the Square Bars is INB127. For the foot pack that we're using with it, is INSU-K5, and for the Fit Kit that is designed for the Maxima, is INK583. We've already got our front crossbar in place and loaded up, we've got our feet on, we're going to show you how we put the Fit Kit onto the foot pack. To slide our foot packs on, we just pull down on the bolt here and they just slide into place onto the bar. We're going to take our rubber pad first and simply place that on the bottom with the ridge facing inside, so the fatter side towards the inside of the foot pack, or the crossbar. Next we'll take our Fit Kit clamp, and we'll just hold that in place. We'll take our two locking pieces, set those in place, and use the lock to tighten that down. more

Watch Video

12/3/2015 3:09:33 PM

Yakima Roof Rack Review - 2015 Nissan Rogue Y00408- Video

Today on our 2015 Nissan Rogue we're going to be doing a test fit of the Yakima roof rack system for the 2015 Nissan Rogue. It's going to be a round bar setup with the factory RailGrab feet pads. If you look here, you'll see part number Y00138. This is going to be your RailGrab setup. It comes with a multitude of different feet that you can attach just by unthreading the bolt on the inside here and putting a new one on. This is a fully adjustable setup. more

Watch Video

5/1/2015 11:41:50 AM

Rhino Rack Roof Rack Review - 2015 Nissan Rogue RRVA126B-2- Video

Today on our 2015 Nissan Rogue we're going to be doing a test fit of the Rhino-Racks roof rack system. It's going to be mounted up on our factory crossbars. We'll go through on how to install it and make sure how it looks and fits for your application. This is going to be your RRVA126B-2, which is going to be your 49" Vortex black aluminum crossbar from Rhino-Rack. These are going to be your feet pad for your application, which is going to be RRSX001. We're going to show you how to put these on. These are the tools that we're going to need. more

Watch Video

5/1/2015 11:41:06 AM

Thule Roof Rack Review - 2014 Nissan Murano- Video

Today on our 2014 Nissan Murano, we will be testing the Thule Aeroblade Rapid Crossroad Roof Rack System using part numbers THARB53 for the 53" load bars front and rear and part number TH450R for the Rapid Crossroad foot packs. So for right now to begin, I'm going to show you how to put our foot pack on our load bar. So what you want to is you want to go ahead and remove your end cap and go ahead and slide your foot pack on your bar and go ahead and put your end cap back. And like I said before with our front load bar already installed we can go ahead and put this on our factory raised rails. We want to make sure that our strap is undone that way it slides underneath. We'll go ahead and set it right about there. Go ahead and make sure our strap is underneath here. All right now first things first, we'll want to make sure we've got a little indicator here. I don't know if you can see that. more

Watch Video

2/18/2015 3:04:44 AM

Thule Roof Rack Review - 2014 Nissan Rogue- Video

Today on our 2014 Nissan Rogue we're going to test fit the Thule Crossroads roof rack system. We're using the 50" square bars. Those are part number THLB50, and the 450 foot packs or the Crossroads foot packs, the appropriate part number is TH450. Now we are using the 50" bars but with the setup the way it is you can go as large as you'd like with the width. It's a preference matter. Some people really like when they hang off so they can put some accessories here on the end. That's going to be up to you. more

Watch Video

10/20/2014 12:03:42 PM

Thule Roof Rack Review - 2014 Nissan Pathfinder- Video

Today on our 2014 Nissan Pathfinder we're going to be test fitting the Thule Crossroads roof rack system. We're using the 58" square bars. This is part number THLB58. We've got the Crossroads foot packs, which are part number TH450. Now we've pre-installed our rear bar. We'll use our front bar here to show you exactly how this installation works. We'll place the front half of the rack right up here onto the front roof line of the vehicle. more

Watch Video

10/20/2014 12:01:48 PM

Thule Roof Rack Review - 2014 Nissan Pathfinder THARB60- Video

Today on our 2014 Nissan Pathfinder we're going to be test fitting the Thule Rapid Crossroads roof rack system. Today we're using the 60" aero blades. These are part number THARB60, and the Rapid Crossroads foot packs, which are part number TH450R. Now per the Thule fit guide it calls for a 53" bar, but we found through a test fit that the 60" bars will work, so we just want to give you an idea what they look like on the car. Now we've already got the rear bar installed so we'll place the front bar right onto the side rails of the vehicle here. Now we need to get our feet in line with each other so what we're going to do is measure back from this fixed point of where the side rails meet the foot of the side rails. We're going to measure back from there 2" to the leading edge of our foot pack. more

Watch Video

10/20/2014 12:01:03 PM

Thule Roof Rack Review - 2014 Nissan Frontier- Video

Today on our 2014 Nissan Frontier we're going to be test fitting the Thule Traverse roof rack system. We're using the 58" square bars. These are part number THLB58. We've got the Traverse foot pack system; that part number is TH480. The fit kit that we're going to use today is part number THKIT1430. Now I've assembled three of the foot packs already. I just want to show you how to assemble the fourth one. more

Watch Video

10/20/2014 11:54:35 AM

Thule Roof Rack Review - 2014 Nissan Pathfinder THARB53- Video

Today on our 2014 Nissan Pathfinder we're going to be test fitting the Thule Rapid Crossroads roof rack system. We'll be using part numbers THARB53 for the aero blades and part number TH450R for our foot packs. We've already got the rear of the rack installed so we'll show you how to take care of installing the front half. We're going to place the front crossbar directly onto the front roof line of our vehicle, allowing it to rest onto our side rails. Now we'll need to find a fixed point to measure from, and there's a nice meeting place between the side rail and the foot pack here, so we'll measure back from that 2" to the leading edge of our foot pack. We're going to do this measurement on both sides. This will help to ensure that our feet are in line with one another. With our feet in line we'll take a quick look to be sure we have our bars centered, or equal overhang on either side. more

Watch Video

10/17/2014 9:05:09 AM

Thule Roof Rack Review - 2013 Nissan Leaf- Video

Today on our 2013 Nissan Leaf, we're going to be test fitting the Thule Rapid Traverse Roof Rack System. Our Aeroblade is part number THARB53. The foot pack is TH480R and the Fit Kit, which includes the clamp and the pad, is going to be part number TH1633. We went ahead and installed our front crossbar so we're going to show you how to install the rear crossbar as well as put one of the foot packs together. We'll begin by turning our bar over and removing the end cap. You'll need to assemble the fit kit onto the foot pack. I like to start with the pad. As you can see, it's got kind of a U-shape and the base on the foot pack has that same shape. more

Watch Video

10/17/2014 7:16:12 AM

Thule Roof Rack Review - 2014 Nissan Frontier THARB53- Video

Today on our 2014 Nissan Frontier we're going to be test fitting the Thule Rapid Traverse roof rack system. We're using the 53" aero blades. Its part number is THARB53. We've got the Rapid Traverse foot packs, part number TH480R. The fit kit that we're going to show you how to install is part number THKIT1430. Now we've already installed three portions of the foot pack. They come with four clips and four pads. more

Watch Video

10/7/2014 5:17:31 PM

Thule AeroBlade Crossroad Roof Rack Installation - 2014 Nissan Rogue- Video

Today on our 2014 Nissan Rogue, we'll be test fitting the Thule Rapid Crossroads Roof Rack System using part numbers THARB47 and TH450R. We'll begin our test fit by placing the front load bar up to the front of our roof on our raised side rails. Now you'll see that there's a connection point where the parallel bars and the raised side rails connect to the anchor points which secure the raised side rails to the roof. I'll just make sure it's about an inch apart from the first part of that foot pack to that crease. Doing this on both side will ensure the front load bar is perpendicular to the roof of our Rogue. With the front bar in position, we'll pop off the end caps and bring the rubber-coated steel straps around the underside of the raised rail. We'll hook them into the connection points and use the Allen tool connected to the end cap to tighten down the black bolt. more

Watch Video

5/27/2014 12:54:31 PM

Thule Traverse Roof Rack Installation - 2013 Nissan Rogue- Video

Today on our 2013 Nissan Rogue, we'll be test fitting the Thule traverse roof rack system using part number t-h-l-b 58, t-h 480 and t-h-k-i-t 1587. With our roof rack assembled according to the instructions, we'll begin our test fit by opening both front doors. We'll grab our front bar and place it on to the front part of our roof. To ensure that we have this bar in the correct location, we need to measure 12 inches from the leading edge of the windshield to the closest point of the foot pack. We'll do this measurement on both sides to ensure that our feet are in line with each other. Then we can use the included Allen tool to tighten the Allen bolt to secure our clamps around the roofline of our Rogue. We'll tighten a little bit at a time on each side to ensure we don't lose our position. Once we have those tight, we can slide the tool into the foot pack and close the cover. We'll grab our rear bar and open our rear doors. more

Watch Video

11/5/2013 10:00:22 AM

Thule AeroBlade Crossroad Roof Rack Installation - 2008 Nissan Xterra- Video

Today on our 2008 Nissan Xterra, we'll be test fitting the Thule Rapid Crossroads Roof Rack System using Part Numbers THARB43 and TH450R. We'll begin our test fit by placing the front load bar onto the front of our roof. We'll use the anchor point, where the side rails anchor down to the vehicle's roof, where we will place our front load bar next to. This will ensure that our front bar is perpendicular to the roof and in the same spot on both sides. With the bar in place, we can pop off the end caps and bring the rubber-coated steel straps around the underside of the bar and hook them into the connection points. We can then turn the black bolt to tighten down the straps up against the side rail of our Xterra. more

Watch Video

9/30/2013 4:18:28 PM

Yakima Q Tower Roof Rack Installation - 2010 Nissan Altima- Video

Today on our 2010 Nissan Altima, we'll be test fitting the Yakima round bar roof rack system, with a length of 48 inches, part number Y00408, the Q-35 Q clips for Yakima Q towers, part number Y00635, and the Yakima Q tower feet for a naked roof, part number Y00124. To begin out test fit, we'll place the front cross bar, already assembled, onto our Altima. The instructions tell us to measure 10 inches from the top edge of the glass to the closest part of the Q tower, to ensure a good fit. By measuring this on both sides of our Altima, our Yakima roof rack will be evenly aligned. Once everything is situated correctly, we'll tighten the thumb screws inside our Q towers, alternating on each side to keep an even fit. When the Q towers are tightened, we can close the cap. Now we'll open our rear doors, and place the back half of the rack onto our Altima. We'll need to measure again from the center of each cross bar, to get the correct placement of our second bar. The cross bar spread should be 32 inches, and as before, we'll measure this on both sides of our Altima. more

Watch Video

9/27/2013 9:36:15 AM

Thule AeroBlade Crossroad Roof Rack Installation - 2012 Nissan Xterra- Video

Today on our 2012 Nissan Xterra, we'll be test fitting the Thule Rapid Crossroad Roof Rack system using part numbers THARB43 and TH450R. With our roof rack system assembled according to the instructions, we'll begin our test fit by placing our front load bar onto the front part of our side rails. We'll find fixed point on each side rail to line up our feet. That way, we can make sure that they're in line with each other. Once we have them in line, we can then bring the strap around our bar, fit it back into the foot of the carrier, and use the included tool to tighten it down. Once we have it secure, we can slide the tool back into the foot pack and move to the other side and repeat the same process. We'll grab our rear bar and place it onto the rear part of our side rails. We want to make sure that our bars are going to be parallel, so we need to set a load bar spread and have a minimum of 24 inches. We'll measure from the center of the front bar to the center of the rear bar. more

Watch Video

9/18/2013 3:48:50 PM

Thule Crossroad Roof Rack Installation - 2012 Nissan Xterra- Video

Today on our 2012 Nissan Xterra we'll be test fitting the Thule Crossroad Roof Rack System. We'll be using part numbers THLB50 and part number TH450. With our roof rack assembled according to the instructions we'll begin our test fit by placing our front bar on to the front part of our roof. You'll want to find a fixed point on the side rail to set up your foot pack. You'll do this on both sides to ensure that your feet are straight across from each other. If you don't have a fixed point on your side rail you can simply get them lined up by taking a measurement. Here on the passenger side we'll bring our strap around our bar, fit it back into the foot pack and tighten down the Allen bolt with the included tool to secure our strap around our bar. Once we've got that tight we can slide the tool back into the foot pack and repeat that process for the other side. more

Watch Video

9/18/2013 9:47:54 AM

Thule Traverse Roof Rack Installation - 2013 Nissan Frontier- Video

Today on our 2013 Nissan Frontier well be test fitting the Thule traverse roof rack system using part numbers THLB58, TH480, and THKIT1430. With our feet, load bars, and fit kit already assembled according to the included instructions, well place our front load bar onto the front of our roof. Well then measure 10 inches from the front part of the glass to the first part of the foot here on the passenger side. Once weve established this measurement we can then pull out the weather stripping to fit the clip into the groove on the underside of the door seal. Well then replace the weather seal back up in place and move to the drivers side. Well then repeat the same process by measuring from the glass to the foot and by removing the weather stripping to place in our clip. With this done we can use the included tensioning tool to turn the silver bolt inside of the foot to bring the clips up around tightly against the roof. more

Watch Video

9/4/2013 8:44:54 AM

Yakima Q Tower Roof Rack Installation - 2013 Nissan Altima- Video

Today on our 2013 Nissan Altima, we'll be testing the Yakima Round Bar Roof Rack System, part numbers Y00409, Y00727, Y00606 and Y00124. With our Q Towers, Q clips and bars already assembled, according to the included instructions, we will begin our test fit by placing a front crossbar onto the front of our roof. You will then need to measure 15 1/8 inches from the front part of the glass to the first part of the tower on both the passenger and driver side of the vehicle. Once we've established this position, we can turn this over bulbs on the inside of the tower and clamp down the black lever to bring the clips up around tightly against the roof line. With this done we can now place our rear bar onto the rear of our roof. Well then measure the crossbar spread. more

Watch Video

8/14/2013 11:47:23 AM

Yakima Q Tower Roof Rack Installation - 2013 Nissan Altima Y00124- Video

Today on our 2013 Nissan Altima, we'll be test fitting the Yakima Q Towers roof rack system, with 48" crossbars, part numbers Y00408, Y00727, Y00606, and Y00124. With everything all assembled according to the instructions, we'll begin our test fit by placing the front crossbar onto the front of our roof. We'll then need to measure 15-1/8" from the first part of the glass to the first part of the tower on both the passenger and driver side of the vehicle. This will ensure the front crossbar is perpendicular to the roof. Once we have established this position, we'll then need to tighten the bolt on the inside of the tower, alternating each side, then clamping down the black cover, bringing the clamp tightly up against the roof line of our Altima. With this done, we'll place our rear crossbar onto the rear of our roof and measure the crossbar spread. more

Watch Video

7/16/2013 1:33:56 PM

Thule Crossroad Roof Rack Installation - 2012 Nissan Rogue- Video

Today on our 2012 Nissan Rogue well be test fitting the Thule Crossroads Roof Rack System, part numbers thlb50, and th450. Well begin our test fit by placing the front load bar onto the front of our roof. Now theres a cutout from the anchor point of the raised side rails and the horizontal bar that runs across which we will use as our fixed point. Well make sure the distance from the first part of the foot to this fixed point is equal on both the passenger and drivers side to ensure the front load bar is perpendicular to the raised side rails of our Rogue. Once weve established this position onto our roof, well then pop off the end cap to bring the rubber-coated steel straps around the underside of the raised side rail. Well then hook them back into position and use the included Allen key to tighten down the black bolt to bring the rubber-coated steel straps up tightly against the side rail. more

Watch Video

7/1/2013 3:33:46 PM

Thule Crossroad Roof Rack Installation - 2012 Nissan Rogue TH45050- Video

Today on our 2012 Nissan Rogue, we'll be test fitting the Thule Complete Crossroad kit, with 50" long bars and locks, part number TH45050. We'll begin our test fit by placing the front load bar onto the front of our roof. Now there's a cutout from the anchor point of the raised side rails and the horizontal bar that runs across, which we will use as our fixed point. We'll make sure the distance from the first part of the foot to this fixed point is equal on both the passenger and driver side, to ensure the front load bar is perpendicular to the raised side rails of our Rogue. Once we've established this position onto our roof, we'll then pop off the end cap to bring the rubber coated steel straps around the underside of the raised side rail. We'll then hook them back into position and use the included Allen key to tighten down the black bolt to bring the rubber-coated steel straps up tightly against the side rail. more

Watch Video

7/1/2013 3:32:58 PM

Thule AeroBlade Crossroad Roof Rack Installation - 2012 Nissan Rogue- Video

Today on our 2012 Nissan Rogue, we'll be test fitting the Thule Rapid Crossroads roof rack system, part numbers THARB53 and TH450R. We'll begin our test fit by placing the front load bar onto the raised side rails of our roof. Now there's a cutout on the raised side rail from the part that anchors into the roof and to the elongated parallel rails on the raised side rails. We'll set the feet on both sides of the vehicle right next to these cutouts to make sure that the front load bar is perpendicular to the raised side rails of our Rogue. Once we've established this position, we'll then pop off the end cap to bring the rubber-coated steel straps around the underside of the raised side rails. We'll then use the included Allen key at the end of the end cap to tighten down the black Allen bolt to bring the straps up around tightly against the raised side rails. more

Watch Video

7/1/2013 10:32:13 AM

Thule Crossroad Roof Rack Installation - 2013 Nissan Xterra- Video

Today on our 2013 Nissan Xterra, we'll be test fitting the Thule Complete Crossroad Kit with 50" long bars and locks, part number TH45050. With our feet and load bars already assembled, we'll begin our test fit by placing the front load bar onto the roof of our vehicle. We'll then measure from a fixed point on both the passenger and driver side of the vehicle, ensuring that the front load bar is perpendicular to the side rails of our Xterra. Once we've established this position, we can then measure the overhang of the load bar on both the passenger and driver side, giving it an even look. Once we've established this position, we can then pull out the end cap to loosen up the Allen bolt to bring the rubber-coated steel straps around the underside of the raised side rail and hook them back into position. We'll then tighten it down and replace our end cap. more

Watch Video

6/24/2013 4:21:57 PM

Rhino Rack Heavy Duty Roof Rack Installation - 2013 Nissan Murano- Video

Today, on our 2013 Nissan Murano, well be test fitting the Rhino Rack 2500 Series Roof Rack with Heavy Duty Square Crossbars, 54 inches long in Silver, Part Number DH1375s. Well also be using Fit Kit, Part Number DK205.To begin our test fit, we went ahead and pre-assembled our roof rack system according to the instructions. Well take the first part of our roof rack and set it up on top of the front part of our roof. To make sure we have our front crossbar at the right location, we need to measure 175 millimeters from the center of the door jamb to the center of our foot plate.Once we have that in the right location, we can then use the included allen key to tighten down each foot pack. Once we have our front crossbar secured to our vehicle, we can then go ahead and shut the doors.Now, well open the rear doors and grab our rear crossbar and set it on unto the rear part of our roof. To make sure that we have this crossbar in the right location, we need to measure 755 millimeters from the center of the front foot plate to the center of the rear foot plate.With our rear bar in the correct location, we can go ahead and tighten down each foot pack. more

Watch Video

6/19/2013 4:50:36 PM

Rhino Rack Roof Rack Installation - 2013 Nissan Murano- Video

Today, on our 2013 Nissan Murano, well be test fitting the Rhino Rack 2500 Series Roof Rack with Aero Bars, 54 inches long in Silver, Part Number DA1375; also available in Black, Part Number DA1375b; using Fit Kit, Part Number DK205.To begin our test fit, well go ahead and assemble our crossbars in our foot packs according to our instructions. Then well go ahead and open up the passenger side and the driver side doors of our vehicle.Well go ahead and set our front crossbar on the front bar of our roof. To make sure that we have our crossbar in the right location, we need to measure 175 millimeters from the door jamb towards the front of the vehicle.Once we have that measurement pinpointed on our vehicle, we can then go ahead and set our crossbar at that position. Well go ahead and do this on both the passenger side and the driver side of our vehicle.Once we have the feet of our crossbars in place, we can then go ahead and use the allen key to tighten it down. With our front bar assembled and put into place, and secured to our vehicle; well go ahead and shut the doors and then open the rear doors of our vehicle.Well grab our rear crossbar and place it on the rear part of our roof. To make sure that we have this crossbar in the correct location, we need to measure 755 millimeters from the center of our front crossbar going towards the rear of the vehicle.Once we have that measurements locked in, we can go ahead and tighten down our rear crossbar and we want to tighten it down on both the driver side and the passenger side of the vehicle. more

Watch Video

6/19/2013 4:47:25 PM

Rhino-Rack Euro Square Roof Rack Installation - 2012 Nissan Sentra- Video

Today on our 2012 Nissan Sentra we're going to be test fitting the Rhino Rack 2500 Series Roof Rack with Euro Square Bars 49 Inches Long in Black, part number ds126b also using part number dk172. We have our roof rack already assembled according to the instructions so we're ready to place it on top of our roof. We'll place the front half of our roof rack system onto our Sentra.To make sure we have it in the right location we need to measure 250 millimeters from the door jamb of the front door and the rear door to the center of our foot pack. We need to do this on both the driver and passenger side of the vehicle. Once we have it in the correct location we can then use the Allen key tool to tighten down each foot. We'll make our way back and forth from driver side to passenger side as we tighten to make sure we get the best fit and that we do not lose position.Once we have this crossbar secured we can then open the rear doors, place our bar on top of the roof. more

Watch Video

6/13/2013 10:25:09 AM

Rhino-Rack Heavy-Duty Roof Rack Installation - 2012 Nissan Sentra- Video

Today on our 2012 Nissan Sentra well be test fitting the Rhino Rack 2500 Series Roof Rack with heavy duty square bars 50 inches long, part number dh1250s, and also using part number dk172. Our roof rack system is already assembled according to the instructions. Well place half of our roof rack system onto the front part of our roof. To ensure that we have it in the right location, we need to measure 250 millimeters from the door jamb of the front and rear door to the center of our foot pack. Well do this on both sides of the vehicle. Once we have it in the correct location we can then use the Allen key to secure it into position. more

Watch Video

6/11/2013 10:32:27 AM

Rhino-Rack Aero Roof Rack Installation - 2012 Nissan Sentra DA126- Video

Today, on our 2012 Nissan Sentra, we will be test fitting the Rhino Rack 2500 Series Roof Rack with Aero Crossbars 50 inches long and silver, part number DA-126, also using part number DK 172. Our roof rack system has already been assembled, according to the instructions. We will begin the test fit by opening both doors at the front of the vehicle. We will set our crossbar onto the front part of our Sentra. To ensure that we have it in the right location, we need to measure 250 mm from the door jams of the rear door and the front door to the center of our foot pack. We will do this on both sides. more

Watch Video

6/11/2013 9:36:17 AM

Rhino-Rack Aero Roof Rack Installation - 2012 Nissan Sentra- Video

Today on this 2012 Nissan Sentra, we're going to be test fitting the Rhino-Rack 2500 Series Roof Rack using part numbers DA126B and DK172. We already have the crossbar assemblies put together, so now we're ready to mount them onto the vehicle. The first thing we need to do is open both the front doors. To position our front bar, we need to measure 250 millimeters from the center of the door gap between the front and rear door. Once we have our position set, we can go ahead and tighten on the front crossbar assembly. We want to be sure we do the measurement on both sides of the vehicle and that we move back and forth from passenger side to driver side as we tighten. This helps us tighten down the system evenly, and helps us make sure that we do not lose our position. With the front bar tightened down, we're ready to move on to the rear. more

Watch Video

6/11/2013 4:37:06 AM

Rhino-Rack Aero Roof Rack Installation - 2008 Nissan Sentra- Video

Today on our 2008 Nissan Sentra we're going to be test fitting a Rhino Rack Roof Rack, part number da126b and fit kit dk172. We already have the crossbar assemblies put together so now we're ready to go ahead and mount them up on the vehicle. The first thing we need to do is open both of the front doors. To position our front bar we need to measure 250 millimeters from the center of the door gap between the front and rear door and the center of the front bar. Once we have our position set we can go ahead and tighten down the front crossbar assembly. We'll move back and forth from driver side to passenger side to tighten down the system evenly. more

Watch Video

4/24/2013 10:06:54 AM

Yakima Q Tower Roof Rack Installation - 2012 Nissan Versa- Video

Today on our 2012 Nissan Versa, well be test fitting the Yakima Roof Rack System. Well be using their 48-inch crossbars, part number Y00408, the Yakima Q Towers, part number Y00124, and fit kits, part number Y00731 and Y00634. We already have the crossbar assemblies put together according to the instructions so now were ready to mount it up on top of our vehicle. Well take the front crossbar assembly and set it up on top of our roof. To position in properly, well need to measure 15 inches from the edge of our windshield to the leading edge of the Q Tower on both the passenger and drivers side in the vehicle. Once we have our front crossbar assembly positioned on our roof, we can go ahead and start tightening it down. more

Watch Video

6/21/2012 12:17:23 PM

  3